Skip to the content.

Zigmod Tutorial

This guide will go over the various common workflows done while using Zigmod as well as how its design goals fit into them.

Initialize a new project

To get started you’ll want to navigate to a new folder and run these commands.

git init
zig init-exe
zigmod init

Zigmod’s init wizard will ask you if the current project is an application or a library and setup some initial properties in your zigmod.yml. However, if you do plan to have a project that is both a library to be used in other Zig projects and an application itself, don’t fret. For Zigmod is able to support both of thses configurations simultaneously.

The wizard will also ask if you’d like it setup any additional metadata files such as .gitignore or LICENSE for you.

Ref: See zigmod init for more info.


Understanding zigmod.yml

Running zigmod init will ask if you want to create an application or a library. Based on you answer the resulting zigmod.yml file have two types.

zigmod.yml for an application (id is omitted)

name: my-package
license: None
description: None
root_dependencies:
  - src: git https://github.com/jecolon/ziglyph

In this case you can use @import("ziglyph") to import the package and use it.

zigmod.yml for a library (id is omitted)

name: my-package
main: src/lib.zig
license: None
description: None
dependencies:
  - src: git https://github.com/jecolon/ziglyph

Here I assume that you initialized your project with zig init-exe or zig init-lib, so in your build.zig the respective addExecutable() or addStaticLibrary() call points to src/main.zig.

In this case you can @import("ziglyph") in src/lib.zig, but not in src/main.zig. However you can @import("my-package") in src/main.zig.

Note: using zig init-exe or zig init-lib for creating a project does not mean that you have to use zigmod init in application or library mode. Creating a zigmod.yml file with proper name and main only makes your package importable by other projects. This is usually not needed with applications, but quite useful in case of libraries; hence the name.

Zig and Zigmod package handling explained

Zig packages can only @import direct children. The include tree is something like this:

root
  A
    C
  B
  D
    E

root can @import A, B and D, but E can be imported only from D. B can not import anything. (Everybody can import relative files, this limitation is only for packages.)

In the library zigmod.yml example from above, the tree looks like this:

root (src/main.zig)
  my-package (src/lib.zig)
    ziglyph (separate package)

root is always set in build.zig using addExecutable() or addStaticLibrary() calls.

It is very important to understand, that my-package is below root, as name/main in zigmod.yml will create a separate package (it will not be chained to root).

If you want to use the dependencies from root, then make sure that your zigmod.yml lists them under root_dependencies instead of dependencies.

Note: Using root_dependencies and dependencies is not mutually exclusive, you can take advantage of using both like Zigmod itself does. Using dependencies requires a proper main field in your zigmod.yml.

Running zigmod fetch

This command will inspect your zigmod.yml and download any new dependencies as well as pulling updates for any ones already download. It will recursively do this for your entire tree until it is full constructed which will culminate in the generation of two output files: deps.zig and zigmod.lock.

deps.zig we will use in the next step integrating with the Zig Build System. Learn more.

zigmod.lock is a way to enable Reproducible builds and often used in CI environments. Learn more.

Add --no-update if you do want it to fetch remote updates and only regenerate deps.zig.

Alternatively, if you want to download updates exactly as defined by the lockfile, use zigmod ci instead of zigmod fetch.

Ref: See zigmod fetch reference for more info.


Integrating with build.zig

 const std = @import("std");
+const deps = @import("./deps.zig");

 pub fn build(b: *std.build.Builder) void {
     const target = b.standardTargetOptions(.{});

     const mode = b.standardReleaseOptions();

     const exe = b.addExecutable("hello", "src/main.zig");
     exe.setTarget(target);
     exe.setBuildMode(mode);
+    deps.addAllTo(exe);
     exe.install();

Note: If you would like to use the external dependencies in tests, do not forget to add deps.addAllTo(main_tests) after the addTest() call.


Adding a dependency

The core of expandability, it is possible to add dependencies to your project. How exactly, depends on where you’re sourcing the information from.


Using build-time dependencies in build.zig

Dependencies that are added to dev_dependencies will additionally be exposed in deps.zig generation under the imports namesapce. https://github.com/Snektron/vulkan-zig is a common example of a package that can be used with Zigmod as a build-time dependency.

const deps = @import("./deps.zig");
const vkgen = deps.imports.vulkan_zig;

pub fn build(b: *Builder) void {

    const exe = b.addExecutable("my-executable", "src/main.zig");

    const gen = vkgen.VkGenerateStep.init(b, "path/to/vk.xml", "vk.zig");

    exe.addPackage(gen.package);
}

Contributing to dependency upstream

When using Git dependencies, Zigmod streamlines the process of contributing back fixes and improvements to your upstream. This is due to the fact that Zigmod will preserve the .git folder when cloning so that you may work with it.

Suppose we have the package https://github.com/octocat/zig-hello.

Zigmod will git clone its contents to .zigmod/deps/git/github.com/octocat/zig-hello. If we find a bug or want to contribute a new feature we may navigate to this directory, edit any files we choose and make commits.

Then fork the repository on github.com or wherever it is hosted and add a local remote so that you have something to push to. git remote add fork https://github.com/you/zig-hello.

Then push your local changes with git push fork master and create your pull request.


Using Zigmod in Github Actions

- uses: nektro/actions-setup-zigmod

This will allow your Github Action task to use the various Zigmod commands. zigmod ci is recommended for this use case as it is similar to zigmod fetch but will fetch the versions only listed in your zigmod.lock.


Publishing your project on Aquila

https://github.com/nektro/aquila is a package index software and CI system designed to work in conjunction with Zigmod.

Note: I, @nektro, host a public instance at https://aquila.red/ available for anyone to use. However Aquila can be self hosted and the only difference in the following instructions will be the domain name.

Navigating to https://aquila.red/ will show you the homepage with recent pacakges and most starred ones.

Clicking the “Login” button will bring you to https://aquila.red/dashboard which will show you a list of your currently imported pacakges. The login screen will prompt you to authorize with an identity provider and ask you for webhook permissions. This is so that aquila can listen for new updates and automatically test them for the CI.

The main nav will contain a link to https://aquila.red/import. Listed will be all of your not-imported Zig projects. Clicking “Select” will not immediately navigate the page in most browsers as the server will attempt to clone and verify your repository. Please be patient while it loads.

Once it brings you to the package page it will now be available for discovery and be automatically included for testing.


Auditing your project’s licenses

This can come in handy for users and organizations alike. The zigmod license command will show you a list of the licenses involved in a project (deeply) and present them nicely grouping similar licenses together and providing a link to the license test for any projects that use a valid SPDX license identifier.

Given the project https://github.com/kristoff-it/bork, at the time of writing that output would look like the following:

image

Ref: See zigmod license reference for more info.


Verifying dependency integrity

Ref: See zigmod sum reference for more info.


Installing online programs to your local machine

Adding ~/.zigmod/bin to your $PATH enables you to install Zig-written command line utilities to your machine with Zigmod.

Ref: See zigmod aq install reference for more info.